CoreXY cerrada · 220×220×250 mm · hotend endurecido · 2024
Creality K1C
Fast, enclosed, and ready for fibre-reinforced filaments
The K1C is Creality's answer to the P1S: enclosed CoreXY, Klipper, and a hardened nozzle as standard for PLA-CF and PA-CF. In exchange, it requires more extruder and filter maintenance.
Starting settings
- PLA (door open)
- 220 °C / 60 °C
- ABS / ASA
- 260 °C / 100 °C
- PLA-CF / PA-CF
- hardened nozzle as standard
- Speed
- up to 600 mm/s, comfortable at 250 mm/s
Common problems with this model
What people ask us most about the Creality K1C, with the full fix one click away.
Maintenance
- Clean the extruder of fibre residue when changing materials.
- Replace the chamber filter every few months.
- Grease linear rails every 300 hours.
FAQ
K1C or P1S?
The K1C is cheaper and comes with a hardened hotend; the P1S has better software and AMS. Both print ABS and ASA without any issues.
Is your Creality K1C not giving you what you need?
Sometimes the part is more urgent than the learning curve. Send us the file and we'll print it with the right material and settings from our workshop in Viladecavalls.
Still not working?
Tell Marco which printer and material you use and he'll tell you what to change.
Impresión 3D