Bed slinger · 250×250×260 mm · ACE Pro multicolor · 2024
Anycubic Kobra 3
Affordable multi-colour, with the ACE Pro as the weak point
The Kobra 3 offers multi-colour for significantly less than the competition. It works well with PLA, but the ACE Pro system is sensitive to wet filament and cardboard spools, which is where almost all error alerts appear.
Starting settings
- PLA
- 210 °C / 60 °C
- PETG
- 240 °C / 75 °C · better without ACE
- TPU
- external spool only
- Purge per colour change
- high: group colours in the slicer
Common problems with this model
What people ask us most about the Anycubic Kobra 3, with the full fix one click away.
Maintenance
- Clean the ACE Pro tubes with a piece of filament and air.
- Wash the PEI sheet with soap and water.
- Grease the Z-screw every 200 hours.
FAQ
Does the ACE Pro actually dry?
It dries at a low temperature, enough to keep PLA in good condition, but it won't recover soaked nylon.
Is your Anycubic Kobra 3 not giving you what you need?
Sometimes the part is more urgent than the learning curve. Send us the file and we'll print it with the right material and settings from our workshop in Viladecavalls.
Still not working?
Tell Marco which printer and material you use and he'll tell you what to change.
Impresión 3D