Open-source project · since 2015
Voron and DIY Klipper machines printers
Build it yourself and understand it inside out
It's not a brand, it's an open design. Building a Voron (or a RatRig, or any CoreXY with Klipper) is the long road, but you end up with a machine you can repair and fine-tune down to the last parameter.
Recommended slicer
OrcaSlicer or SuperSlicer on Klipper
Ecosystem
Klipper + Mainsail/Fluidd, all open and documented
Downloadable PDF guide
Usage tips, an hour-based maintenance plan and starting temperatures for your Voron and DIY Klipper machines, in a PDF you can print and keep next to the machine.
Free, no sign-up. 2 pages.
Models and links to their official manual
Each model with a quick spec sheet and a direct link to the brand's official documentation.
Voron and DIY Klipper machines Voron 2.4
CoreXY cerrada · flying gantry · 250–350 mm
Official manualVoron and DIY Klipper machines Voron Trident
CoreXY · cama en 3 husillos · 250–350 mm
Official manualVoron and DIY Klipper machines Voron 0
CoreXY compacta · 120³ mm
Official manualVoron and DIY Klipper machines Klipper / firmware
Configuración y calibración del ecosistema
Official manual
What they do well
- Total control: every parameter is yours
- Excellent assembly documentation and a highly technical community
- Standard spare parts from any supplier
Where they give trouble
- Realistic 40–60 hours of assembly for the first time
- No official support: you rely on the community
- The budget skyrockets if you buy quality components
Workshop tips for Voron and DIY Klipper machines
Calibration order
Mechanics first (gantry squareness and belt tension), then PID, then resonances, and finally pressure advance. Changing the order means measuring noise.
Kit printed parts
Print them in ABS or ASA if the machine will have a heated enclosure; in PLA they deform at 55 °C inside the enclosure.
Official support and downloads
- Voron documentation
- Klipper documentation
- Ellis' Print Tuning Guide
The reference fine-tuning guide
Problems we solve step by step
The corners of the part are lifting (warping)
See the fixThe first layer isn't sticking to the bed
See the fixThe base of the part is flared (elephant foot)
See the fixHow to calibrate the nozzle height (Z-offset)
See the fixMy nozzle is clogged
See the fixLess material comes out than expected (under-extrusion)
See the fixIs your Voron and DIY Klipper machines not giving you what you need?
Sometimes the part is more urgent than the learning curve. Send us the file and we'll print it with the right material and settings from our workshop in Viladecavalls.
Still not working?
Tell Marco which printer and material you use and he'll tell you what to change.
Impresión 3D